How to do Windows 7 Startup Repair. How to start System Restore when Windows won't boot

Instruction

If you cannot start Windows, use Safe Mode to restore your system. Restart your computer and press F8 on your keyboard after the POST beep. In the boot options menu, check "Load Last Known Good Configuration". Choose a rollback point closest to the date when the system was stable.

You can choose the "Safe Mode" method. When asked by the system about working in this mode answer "No". After that it should start recovery systems.

If you see the message: "System Restore failed", reboot again, press F8 and check the option "Safe mode with command line support". Log in with administrator rights. After downloading, enter the code %systemroot%system32 into the command line
estore
strui.exe. Then follow the instructions.

If System Restore is disabled on your computer, you won't be able to back up. There may be a situation when, due to incorrect operation of the computer, it is not possible to enable this option. In this case, reboot and log in to the system in safe mode with administrator rights.

Go to the "Control Panel" and expand the "Administrative Tools" node. Launch the Services snap-in. Locate the "System Restore Service" item and right-click on it to bring up the drop-down menu. Select the "Start" command.

You can run this function from the command line. Apply the combination Win + R and enter the compmgmt.msc command. Double-click the Services and Applications node and check the Services component.

On the right side of the screen, find the "System Restore Service" item. Right-click on it and select "Start" from the context menu.

There is another way. Call command line and type cmd. Type the net start command in the console window.

Helpful advice

You can call the command line from the "Start" menu by selecting the "Run" option

Sources:

What is protected mode?

Protection of the Windows operating system serves to “roll back” the entire structure to a healthy state, before making any changes to it, or the actions of malicious programs. However, there are situations when it is necessary to temporarily (in some cases for a long period) disable. This is not so difficult to do, the main thing is to adhere to a certain algorithm of actions.

You will need

Personal Computer

Instruction

Restart your computer for the changes to take effect. To do this, go to the "Start" menu and click the "Restart" button. You can also reboot with the button located on the system, but it should be used only in cases where it is not possible to reboot in the standard way. Once the computer restarts, go back to the System Restore tab. The system will warn you that this feature has been disabled. This means that you did everything right.

Do not forget to enable system protection after you have completed all the necessary actions (for example, the antivirus removed infected files from the Restore folder). Otherwise, you will not be able to use the service. protection system, which can cause it to become unstable.

Procedure( )

There are many reasons why Win 7 can crash so much that it stops loading. To solve the problem, you need to use a tool that allows you to return everything to its place. It starts via BIOS:

It is worth noting that some laptop manufacturers even create special software that allows you to quickly restore the device to working capacity. For example, HP offers " recovery manager», Samsung Solution. In general, any large company provides similar functions.

Your computer won't boot, what to do? During operation, this is possible due to the harmful effects of various viruses, your erroneous actions during the operation of the device, or the use of incorrect drivers. But do not despair, let's learn how to get out of this unpleasant situation with dignity.

You need to insure yourself against sudden problems in the future with the help of the recovery and backup functions built into the system. Thus, you can restore Windows 7 without using third-party special programs, even when it is impossible to load System Recovery Options and the F8 key during the boot process has no effect.

So, let's learn insurance.

It is known that Windows 7 is equipped with a powerful tool " Recovery environment”, which is created automatically during the installation of this operating system. This happens in a hidden section that contains five additional tools for solving problems with malfunctions and malfunctions.

Remember that if you master these recovery tools well, then there will be no need for additional paid data backup programs.

The recovery tools are launched by pressing the F8 key, which must be pressed immediately after starting the computer. The menu "Additional boot options" will be displayed on the screen:

Safe mode;
Safe mode with loading network drivers;
Etc.

Choose ""...

... and get into the menu "". Just what we need. We have the opportunity to choose the “System Restore Tool” we need from the five presented:

Note: During the installation of the Professional or Ultimate OS, a partition with the recovery environment is created automatically in the Recovery folder located in the root of the C: drive. In the Disk Management window, a hidden separate 100 MB hard drive partition is visible, which is designed to store the BCD configuration boot files and the system bootloader in the form of a bootmgr file. To see these resources, you need to go to Computer -> Management -> Disk Management. This section categorically cannot be deleted, otherwise you will not boot the system.

There are cases when there is no recovery environment partition, by pressing the F8 key, you see the "Advanced boot options" menu without the "Troubleshoot your computer" item. What to do?

You need an installation disk with Windows 7. We start loading the original disk and select the item "":

The System Recovery Options menu will appear on the monitor:

However, if there is no original installation disk or it is corrupted, then the "Windows 7 Recovery Disk" may become a way out of the situation.

Note: Looking at the screenshot, you see another hidden partition with a capacity of about 10 GB, it cannot be deleted either. In this case, we are talking about a laptop and its factory settings are stored in this section. This is another option for system recovery.

So, in the Select recovery tool menu, let's try to deal with the tab " Launch Recovery". We press and see that there is an analysis of the malfunctions that have arisen with their further elimination. The computer warns that problems were found in the settings and you need to select "Fix and restart."

Now let's deal with the tab "". This feature will help you select a system restore point that you created earlier. Works if the function was not disabled during system settings. There is a rollback back to the time when the system functioned properly.

The next option is the tab "". With the skillful use of this tool, there is no need for paid programs for data backup. This is a real help if you don't have the original Windows 7 installation disc, or if you accidentally deleted the laptop's factory settings partition.

And there are also problems when the action of the virus does not allow the operating system to boot. An excellent way out of the situation would be an archive image of your system on your hard drive, which was created when you installed Windows 7 on your computer earlier using the System Image Restore function. He must be protected.

Together with the Windows 7 Recovery Disk, the image will help you quickly restore the OS if the Advanced Boot Options menu does not load.

So, Start -> Control Panel — > .

Select the "" tab:

Under it, select "Local disk for storing the archive." The best option is when it is possible to place it on another hard drive, without an operating system installed.

Click "Archive" - and the process has begun.

The created archive with Windows 7 will look something like this:

Having such an archive, you will be able to deploy it in case of need very quickly. And if you have the same archive copied on a portable hard drive, then you will double protect yourself from trouble.

Now, if it is impossible to start Windows 7, we activate " Recovery Tool” by pressing the F8 key on the keyboard immediately after turning on the computer. In the drop-down menu "Additional boot options" select "":

Then choose ""...

... and in the menu that appears " Use the latest available system image».

Well, another option for system recovery is " Recovery disk". We write recovery tools to this disk to fix the OS boot failure or use it to restore the system from a previously created backup copy.

Let's create such a disk. To do this, we enter "" ...

... and in the menu that appears, select "" ...

... insert a DVD into the drive and click " Create disc».

Created in this way "" put in a safe place.

Restoring Windows 7 from a Recovery Drive requires almost no other tools. To troubleshoot, you need to set the priority drive in the BIOS of the computer, insert the disk and restart the computer.

This disk will help you avoid a complete reinstallation of the operating system from scratch, which will destroy all data and information in the installation partition, and this is very undesirable. With the disc, you simply restore the Windows 7 boot process.

Good luck to you, I hope the article will help you solve your problems.

Often, users of computers running Windows 7 encounter operating system health problems. Computer problems usually appear when it slows down and programs do not open. Also, the computer may not start at all or do it every other time.

The reasons that cause problems in the performance of the operating system can be very different. For example, if a computer gets virus, it can damage system files. Also, difficulties with the PC may appear during installation. low-quality software, which can damage the structure of system files. To solve the problem with the health of a computer on Windows 7, you need to roll back to the previous restore point.

To protect the OS in Windows 7, restore points are used that the system periodically creates. Essentially, restore points are previous state of Windows 7 system files. To help the Windows 7 PC user, we have prepared a material that will describe the detailed system recovery process in various ways.

Recovery in the loaded seven

If your Windows 7 computer boots, but the system is not stable, then it's time to roll back to a previous restore point. First of all, we need to get into the window in which you can call up the system recovery options. To do this, open the program "" by pressing the key combinations Win + R, through which we enter the following command: systempropertiesprotection

A window should open before us. Properties of the system» tab « System protection". You can also get to this window in the standard way through the menu " Start". The next step is to press the button Recovery….

After clicking, the System Restore window will open. It will prompt you to restore the system using the recommended access point or choose another one. We will stop at recommended restore point.

This window requires confirmation for the selected restore. To confirm, press the button Done.

This button will bring up a message warning that after the restore procedure it will be impossible to return to the previous parameters of the seven. By clicking on the Yes message, we will start the Windows 7 system restore.

If the process of returning to the previous state occurred without errors, then a corresponding message will be displayed.

If you are unable to roll back to the previous settings using the recommended point, then you should select the point that was created later than the selected restore point Windows 7 systems. I would also like to note that to perform this operation, you will need special privileges. That is, when you log in, you must select an account admin and enter a password for it.

We return the computer to working capacity at OS startup

In case your PC is running seven at all is not downloading, then you can start the operating system in safe mode. After the BIOS start window appears, press F8 on the keyboard (for laptops there may be another key, for example, Del or one of the function keys). This action will cause menu of alternatives loading sevens.

In this menu, select the item " Safe mode”And continue by pressing Enter, after which the system will start in safe mode.

If the system has successfully started in safe mode, then start the recovery of the seven, as shown in the previous example. In this mode, for maximum security many features disabled OS, including the Windows Aero graphical interface. This is how the running program "" with the command " system properties protection” on a system running in safe mode.

We return the computer to working capacity using the installation disk or bootable USB flash drive

If the two previous examples do not help you, then you will need to restore the seven installation disk or flash drive. For computers that do not have an optical drive, you need to use a bootable USB flash drive with the OS. A bootable USB flash drive can be created using special utilities. The most popular utilities for this purpose are Windows USB/DVD, Download Tool And Rufus.

Boot from the installation disk or via a USB flash drive. In the start window of the installer, click the Next button and proceed to the next window.

After searching, select the OS you want to restore and click Next.

In the window that appears, select the same item " System Restore».

This action will launch the seven recovery utility. In the utility, click the Next button. This action will take you to restore point list. We choose a suitable point and continue.

A window will appear in front of you, as in the first example. Therefore, we press the Finish button and respond to the message, after which we will start the recovery.

After a successful rollback to the previous state, you will receive the following message.

Windows 7 Disaster Recovery with Antivirus

If your PC is infected viruses, interfering with the correct operation of the computer and the first three examples considered do not help you, then a good way to restore in this case would be an anti-virus life disk from Dr.Web. With this disc you can clean the system from all kinds of dangerous software. In addition to cleaning, Dr.Web LiveDisk can disinfect infected objects, which are necessary to restore Windows 7.

The Dr.Web LiveDisk image can be used both for recording onto an optical disc and a flash drive. To use Dr.Web LiveDisk on a USB drive, you need a special program. You can download the program for writing to a USB flash drive and the image itself on the official website by going to the page www.freedrweb.ru/livedisk.

Let's start the recorded image on the disk, setting it in the BIOS as the first boot.

In the start window of the bootloader, select first item Dr.Web LiveDisk and press Enter. These actions will start downloading Dr.Web LiveDisk.

After downloading Dr.Web LiveDisk, we will get a full Linux-based operating system. As it was written earlier, the main purpose of Dr.Web LiveDisk is to clean and cure of virus software. Therefore, antivirus is built into this OS. Dr.Web CureIt!. This antivirus is launched along with the OS.

Let's click in Dr.Web CureIt! button Start scan, which will start scanning, cleaning the system and disinfecting viruses.

After verification, Dr.Web CureIt! delete or disinfect infected objects.

Since there will be no more malicious code in the system, you can safely restore the system in three ways, which are described above.

If after checking the system files you cannot restore the Windows 7 system, then the only reasonable solution is to make a full backup of the information and reinstall the system again.

How to make a system image in seven

Another recovery feature in Windows 7 is creating a system image. In this image, you can save all the information on the hard drive, including the operating system. By restoring in this way, you will receive an OS with the same parameters as on the day the image was created.

Run " Control Panel' and go to the tabs ' system and safety», «»

In the window that opens for creating an image, specify the location to save it and click Next.

In the window that appears, it remains only to click the button Archive, which will start the process of creating an image.

You can restore the created image with Windows 7 and all information on local drives using the installation disc. The principle of recovery is shown in the second example, only when choosing a recovery method, you need to select " Restoring a system image” and specify its location on the saved drive.

Alternative methods for restoring the Windows 7 operating system

In addition to the standard recovery methods, there is an alternative software that does the same function. The most interesting solution that allows you to restore the system is the program Acronis True Image 2016. This is a proprietary software package from Acronis.

First of all, let's download and launch Acronis True Image 2016 from the shortcut on the Desktop. When launched, the program will ask for a username and password.

Now let's set up Acronis True Image 2016 so that he can do full disk backup with Windows 7. This setting should be done immediately after installing the OS, so that in the process of using Windows, you can restore functionality from several backup copies of the system created in a certain period of time. So let's get started with the setup. To do this, select the type of storage by clicking on the link "".

In the window that opens, select the storage " Acronis Cloud».

Now let's create a schedule for our backups. To do this, press the button " Options” and go to the storage settings settings. On the first tab, select the schedule you like for creating backups of our system.

As you can see, the entire computer is selected as the backup source. Therefore, in the schedule set by us, a backup copy of the system will be created in the cloud storage " Acronis Cloud».

For an example of recovery, let's take an archive copy not from the Acronis Cloud cloud storage, but from the hard drive. If a backup was created on the computer, then Acronis True Image 2016 he will find her.

So we press the button Repair your computer, after which the program will completely restore the system to the state that it was when the backup was created. Also, if you are unable to start Windows 7 on a computer, Acronis True Image 2016 there is a boot image for this that can be burned to disk.

You can download this image on your account page. You can get a password and login on the official website www.acronis.com. The principle of the bootloader is the same as with the desktop version. Load disc from Acronis True Image 2016 on the computer, you can set it in the BIOS first when booting.

From the example it turns out that the utility allows full control over the creation of PC recovery copies and back up your entire system to the cloud.

Acronis True Image 2016 boot disk example

To start a disc Acronis True Image 2016 when starting the system, you must set the boot mode from the optical drive to the first in the BIOS. For example, for the MSI A58M-E33 motherboard, these parameters in BIOS mode look like this.

Another way to boot is to use hotkeys to call up the BIOS boot drive menu. For example, for the MSI A58M-E33 motherboard, the hotkey is the F11 button. By pressing this button, we will launch a special mode in which, when the system starts up, drive boot menu in BIOS.

After booting from the Acronis True Image 2016 disk, we will get to such a menu.

In this menu, select Acronis True Image 2016, after selection, the program will start.

The example shows that starting the boot disk Acronis True Image 2016 using the desired BIOS mode is not at all complicated.

Summing up

In this article, we have analyzed almost all the methods and parameters system recovery. We also looked at ways to restore the seven with alternative software and with the help of an antivirus. Which way to choose to restore Windows 7 depending on the situation is up to you.

Summing up, I would like to note that they mainly disrupt the operation of the OS viruses and experiments with different illegal software. Therefore, so that you do not have to constantly restore the system, use only proven and licensed software, and also use reliable comprehensive anti-virus protection.

I would also like to note that the considered examples in the material will work not only on Windows 7, but also on more modern operating systems, such as Windows 8 And 10 . And we, in turn, hope that our material will allow you to properly restore Windows 7 and you can say with confidence that I can do system restore.

Related videos

If Windows stops loading, then you can use standard utilities to restore correct operation.

One of the main nightmares of computer enthusiasts is to face a situation where they cannot turn on the device. The operating system starts to load, but eventually displays a message like: “Windows updates could not be configured, changes are being rolled back, do not turn off the computer.” After that, nothing new happens anymore - the software fails to recover, and the download stubbornly does not help.
Free online course "Windows 10 Simple Steps" Learn the basics of working with the Windows 10 operating system in our free online course. Short visual lessons will greatly facilitate the daily use of the PC.

System recovery tools

Before the release of Windows 7, this situation turned into numerous dances with a tambourine, and often even a complete reinstallation of the operating system. Now everything is different, and often the problem is solved by standard tools from Microsoft, which do not even need to be specially installed. The task is to be aware in principle that such tools exist, as well as to banal mindfulness about it when the “irreparable” suddenly happened.

The trick is that when the computer boots up, even before the Windows boot icons appear, you have time to get into the advanced options of this very boot, where it will be possible to run diagnostics and, if necessary, restore the system to the selected checkpoint. In Windows 7, it was required to press the function key at boot F8, then select the “Troubleshooting” option (although in rare cases the “Last Known Good Configuration” option saved).

Additional Windows 7 Boot Options

Once in the “System Recovery Options” menu, in most cases one of the first two options became the salvation. “Startup Repair” could save the operating system automatically, and “System Restore” required you to manually select a checkpoint to which the rollback will be performed.

Windows 7 System Recovery Options

In order to be able to restore it to its initial state in the event of a malfunction of the operating system, you must first make a recovery disk.
Microsoft would change itself if, with the update of its offspring, it would leave all the useful tools in the old way. Windows 10 system recovery is carried out by pressing “hot keys” Shift+F8, and, unlike the “seven”, you need to press this combination very, very quickly, since the operating system itself began to load much faster.

The appearance of the saving menu has also undergone changes. By selecting “Diagnostics”, in “Advanced Options” there are already familiar to us “System Restore” and “Startup Repair” (only in a different order). There is also an option to "Revert to a previous build" if you upgraded to Windows 10 from a previous version of Windows.

If Automatic Repair Didn't Work

Restoring a Windows system to one of the past checkpoints is not a difficult task. It is only important that these points themselves exist in the system, because sometimes users themselves manually disable their creation, at the same time deleting the existing ones. It really makes sense to clean out old checkpoints from time to time, as they take up a lot of space. But abandoning restore points altogether is a risky business.
How to navigate the Internet without picking up viruses? Secure DNS servers will help.
To make sure that restore points are automatically created for you or to make changes to the corresponding settings, you need to select the “Large icons” icon display (or Small, but not Categories) in the “Options” window and select the “Recovery” item. There, already select “System Restore Settings”, check whether protection is enabled and, if necessary, use the “Configure” button. Here you can manually create a point for subsequent recovery.

If we have restore points, then using the method described earlier, that is, using the built-in Windows tools for system recovery, you can quickly roll back to an earlier state of the computer without losing important files.

As a last resort, you will have to restore the system to its original state or to a previously created system image. It is desirable to create a “System Image” and “System Recovery Disk” in a working state of the operating system, after you have installed all the applications you need. This is all done through the same “Control Panel” (they are also “Settings”), when browsing by “Categories”, selecting “Backup and Restore (Windows 7)”. Here you can also restore the operating system to a previously created image if the computer is still booting, but has already stopped working as it should.
With each release of the operating system, Microsoft asks users for more and more information. But you can moderate her appetites.

Restoring a laptop to factory settings

If standard tools do not help, and you do not have a disk or USB device with a recovery image, then laptop owners can use the “hot keys” to launch the built-in recovery utility. Some models may even have a separate key for these purposes, for example, Lenovo's OneKey Recovery, but this is rather an exception. In other cases, it is important to know exactly which “hot key” is for your laptop, since it tends to differ from manufacturer to manufacturer.

Hot Keys for Notebook Manufacturers:

F3– MSI;
F4– Samsung;
F8– Fujitsu Siemens;
F8- Toshiba;
F9- ASUS;
F10- Sony VAIO;
F10- Packard Bell;
F11- HP Pavilion;
F11- LG;
F11- Lenovo ThinkPad
Alt+F10- Acer (before that, select in the BIOS - Disk-to-Disk (D2D));
Ctrl+F11- Dell Inspiron;
Hold down [ alt] - Rover.

The factory utility will restore the device to its original state, as if it were fresh from the store. This will delete all programs with settings, all files, including favorite photos, which it makes sense to store in cloud services just for such cases. However, the device will be able to work again, and in some cases this method will simply help prepare the laptop for subsequent resale or transfer to relatives.

Seal

Also interesting:

How to spell correctly: numbering or numbering?

Idle sitemap htm. sitemaps. Common Misconceptions About Sitemaps

Discount coupons and promotional codes DNS Delivery and payment methods

We recommend reading:

2023-06-30 04:50:27

Cs money - fake scam project will take your skins

2023-06-30 04:50:27

Bonus and invite codes War Thunder

2023-06-30 04:50:27

Discount codes and promotional codes "cyan

Continuing the topic:

Programs

Online store of skinon stickers and cases

SkinOn is an amazing online store where everyone can buy for themselves something that they certainly cannot find anywhere else. Originality and uniqueness...